 Black Bear Construction Co., Inc.Trestle and Bridge Building Supplies for the Model Railroader |
|
|
There are a lot of trestles on the RGS, and all the bents are a little bit different. The curved trestles in the Gallagher Creek, CO, area are the basis for the standard Black Bear RGS frame bent. The design is based on Joe Sacks' drawings in The RGS Story Vol. IV, Sundance Books, pp. 358-360. This kit comes with everything you need to build a 50' tall x 120' long trestle. |
||||||||||||||||||||
Scale Size: |
 |
| YOUR CHOICE OF CONSTRUCTION TECHNIQUES | ||||
|
|
|
||
| The FALSE FRAME BENT has the look of the prototype without the difficulty of construction. | The NOTCHED FRAME BENT looks like the prototype but is much stronger. The legs are continuous from the top cap to the ground. | The TRUE FRAME BENT is prototype modeling at its best. You will be surprised by how easy it is to build this bent. | ||
|
Construction Jig and Instructions This kit comes with the new "4-leg" assembly jig that allows all of the above construction techniques. A FRAME BENT is characterized by horizontal sills that interrupt the vertical legs. They were common in southern Colorado and New Mexico where the trees don't grow as tall as they do in other parts of the country. All the instructions, drawings, and documentation you need is included with the jig. Eight pages of step-by-step instructions show how to build the bents and install the trestle in your layout. A full size drawing shows you complete details of this classic narrow gauge trestle design. The jig can be purchased separately if you already have all the wood you need. Materials Pack Wood is supplied in bulk - 24" long pieces. That makes it easier to build long and tall trestles. If you want to build a trestle twice as tall, buy two materials packs. If you want to build a trestle twice as tall and twice as long buy four materials packs. You can buy as many materials packs as you need without having to buy another jig. NBW Pack NBW's are not included with the kit. An NBW Pack (TJN-N) for HO scale trestle kits is available under HO Scale Kits > Accessories. |
|
|||||
| WOOD SIZES TO USE |
| ||
| Part | Prototype | "HO" Scale | |
| A | 12" x 12" | 1/8" x 1/8" | |
| B | 3" x 10" | 1/32" x 3/32" | |
| C | 6" x 12" | 1/16" x 1/8" | |
| Girts | 6" x 8" | 1/16" x 3/32" | |
| Stringers | 8" x 18" | 3/32" x 3/16" | |
| ||||||
|
|
 |
Jig comes with the Leg Cutting Guide to make it easier to build True Frame bents. Check out How to Use the Cutting Guide. H = 7.2" W = 5.2" |
| ||||||
|
|||||||||||||||||||||||||||||||||
PO Box 26911
Austin, TX 78755-0911
(512) 467-8400 FAX:(512) 458-8765
