 Black Bear Construction Co., Inc.Trestle and Bridge Building Supplies for the Model Railroader |
|
|
This is a typical RGS trestle design. It can be used with standard gauge or narrow gauge. There is no Zn3 that we know of, but we are ready when it shows up! Meanwhile it will look great with the steam locomotives you've got. This kit comes with everything you need to build a 55' tall x 110' long trestle. |
||||||||||||
Scale Size: |
 |
|
Construction Jig and Instructions This kit comes with a "4-leg" assembly jig that allows the frame bent to be modeled to look a lot like the prototype without the difficulty of construction.. A FRAME BENT is characterized by horizontal sills that interrupt the vertical legs. They were common in southern Colorado and New Mexico where the trees don't grow as tall as the do in other parts of the country. All the instructions, drawings, and documentation you need is included with the jig. The step-by-step instructions show how to build the bents and install the trestle in your layout. The jig can be purchased separately if you already have all the wood you need. Materials Pack Wood is supplied in 6" long pieces. Wood is available in 24" lengths to make it easier to build long and tall trestles. There is enough bracing material to install diagonal braces and girts throughout the trestle. If you want to build a trestle twice as tall, buy two materials packs. If you want to build a trestle twice as tall and twice as long, buy four materials packs. You can buy as many materials packs as you need without having to buy another jig. |
|
||||||||||||||||||||||||||||||||||
| WOOD SIZES TO USE |
| ||
| Part | Prototype | "Z" Scale | |
| A | 12" x 12" | 1/16" x 1/16" | |
| B | 3" x 10" | 1/64" x 3/64" | |
| C | 6" x 12" | 1/32" x 1/16" | |
| Girts | 6" x 8" | 1/32" x 1/32" | |
| 1 pc. Stringers | 18" x 18" | 3/32" x 3/32" | |
| ||||||
|  |
H = 3-3/8" W = 2-3/8" |
| ||||||
|
|||||||||||||||||||||||||||||||||
PO Box 26911
Austin, TX 78755-0911
(512) 467-8400 FAX:(512) 458-8765
